高碳高钢系高速钢的耐磨性研究

制备了不同成分的新型高碳高钢系高速钢,并与高铬铸铁对比考察了其耐磨性和磨损机理。结果表明：高碳高钡系高速钢的耐磨性明显优于高铬铸铁;其组织中的碳化物形态对耐磨性具有显著影响,其中具有细小及弥散分布的颗粒状ＭＣ型碳化物组织的试样的耐磨性最佳;其磨损机理为犁削和应力作用下碳化物的脆性碎裂及脱落。     

Induced current of high temperature superconducting loops by combination of exciting coil and thermal switch

With its commercialization, the second-generation (2G) high temperature superconducting (HTS) RE—Ba—Cu—O (REBCO, RE is rare earth) tape is extensively applied to the superconducting magnets in the high magnetic fields. However, unlike low temperature superconducting (LTS) magnets, the HTS magnet cannot operate in the persistent current mode (PCM) due to the immature superconducting soldering technique. In this paper, an exciting method for two HTS sub-loops, so-called charging and load loops, is proposed by flux pump consisting of exciting coil and controllable thermal switch. Two HTS sub-loops are made of an REBCO tape with two slits. An exciting coil with iron core is located in one sub-loop and is supplied with a triangular waveform current so that magnetic field is generated in another sub-loop. The influence of magnetic flux on induced current in load loop is presented and verified in experiment at 77 K. The relationship between the induced magnetic flux density and the current on the sub-loops having been calibrated, magnetic flux density, and induced current are obtained. The results show that the HTS sub-loops can be excited by a coil with thermal switch and the induced current increases with magnetic flux of exciting coil increasing, which is promising for persistent current operation mode of HTS magnets.     

Small-angle neutron scattering study on the stability of oxide nanoparticles in long-term thermally aged 9Cr-oxide dispersion strengthened steel

A 9Cr-oxide dispersion strengthened (ODS) steel was thermally aged at 873 K for up to 5000 h. The size distribution and chemical composition of the dispersed oxide nanoparticles were analyzed by small-angle neutron scattering under a magnetic field. Combined with transmission electron microscopy, Vickers micro-hardness tests and electron backscattered diffraction measurements, all the results showed that the thermal treatment had little or no effect on the size distributions and volume fractions of the oxide nanoparticles in the ferromagnetic matrix, which suggested excellent thermal stability of the 9Cr-ODS steel.     

基于SEM与FTIR研究改性钢渣/橡胶复合材料的热氧老化机理

钢渣是冶金工业中产生的主要固体废弃物,其产量约为每年粗钢产量的15%~20%。由于技术的局限,导致我国钢渣利用率较低,仅为年钢渣产量的10%,同时加之管理制度的不健全,导致钢渣大量露天堆放,对土地资源、地下水源,以及空气质量形成严重影响。面对上述问题,以热闷渣、电炉渣和风淬渣研发改性钢渣微粉,并且将改性钢渣微粉与复合橡胶进行复合制备改性钢渣/橡胶复合材料。依据《硫化橡胶或热塑性橡胶热空气加速老化和耐热试验》（GB/T3512—2014）对改性钢渣/橡胶复合材料进行热氧老化处理,采用平衡溶胀法测定改性钢渣/橡胶复合材料的交联密度,扫描电子显微镜（SEM）、热重分析仪（TGA）和傅里叶转换红外光谱仪（FTIR）分别测试其微观形貌、失重率和结构组成,从微观层面阐述改性钢渣/橡胶复合材料的热氧老化机理。结果表明在热氧老化前期老化作用在改性钢渣/橡胶复合材料表面,其内部以交联键形成反应为主;在热氧老化中期老化作用已经作用改性钢渣/橡胶复合材料内部,造成交联键断裂反应速度高于交联键形成反应速度,形成大量断裂交联键;在热氧老化后期由于改性钢渣/橡胶复合材料内部已经存在大量断裂交联键,导致主链及交联键断裂速度降低,交联键形成反应占优势。改性钢渣微粉以热闷渣（SiO₂含量高）为原材料,有利于形成聚合物大分子链贯穿炭黑网络的结构,提高综合性能,尤其是物理机械性与滞后性;以电炉渣、风淬渣（Fe₂O₃含量高）制备改性钢渣微粉,有利于热传导性能的改善,不仅提高改性钢渣/橡胶复合材料的耐热性,而且提高其硬度与脆性。热氧老化过程中改性钢渣/橡胶复合材料内部在橡胶分子链α-H上发生了不同程度的氧化反应,并在橡胶分子链周围生成了羟基、羧基和醇类化合物,双键烯氢含量降低。     

基于非平衡电桥原理的热导池

热导池的核心结构是非平衡电桥,介绍了热导池的工作原理,并进行了程序升温还原和程序升温脱附实验.     

最佳逼近算法电感耦合等离子体原子发射光谱测定镀铝锌彩涂板镀层中铝、锌、硅和铁

用三乙醇胺褪除镀铝锌彩涂板表面的油漆涂层,选用1：3 HCl溶解热镀在冷轧钢板两面的铝锌合金镀层,事先不用考虑钢板中的Fe是否部分溶解到酸溶液中,用电感耦合等离子体原子发射光谱同时准确测定酸溶液中Al、Zn、Si和Fe的浓度,采用最佳逼近算法,不仅准确计算镀铝锌彩涂板镀层中Al、Zn、Si和Fe的含量,而且钢板基板被酸所溶解下来的Fe也能准确计算出来。通过对镀铝锌彩涂板实际样品的测定,本法与X射线荧光光谱仪和辉光放电原子发射光谱仪测试结果非常吻合,相对标准偏差RSD均小于3．0％。方法操作简便,非常实用。     

Families of completely positive maps associated with monotone metrics

An operator convex function on (0,∞)$(0,\infty )$ which satisfies the symmetry condition k(x⁻¹)=xk(x)$k(x^{-1})=xk(x)$ can be used to define a type of non-commutative multiplication by a positive definite matrix (or its inverse) using the primitive concepts of left and right multiplication and the functional calculus. The operators for the inverse can be used to define quadratic forms associated with Riemannian metrics which contract under the action of completely positive trace-preserving maps.     

Portable Raman study on the conservation state of four CorTen steel‐based sculptures by Eduardo Chillida impacted by urban atmospheres

Weathering steel, and particularly CorTen steel, is a very used material for modern artworks exhibited outdoors. One of the characteristic that makes this material so attractive to artists is the property to develop a protective rust layer composed by iron oxides which preserves its metallic core from atmospheric corrosion. This study was conducted to evaluate the conservation state of four CorTen sculptures by Eduardo Chillida, located in different places of Bilbao city (north of Spain) and affected by different factors (environmental among others) by using Raman spectroscopy. Measurements were performed in situ with a handheld Raman spectrometer mounted on a tripod with x–y–z axes motorization at the micron level. The most common oxyhydroxides detected were lepidocrocite (γ‐FeO(OH)), goethite (α‐FeO(OH)), hematite ( ‐Fe₂O₃) and magnetite (Fe₃O₄), being goethite the most stable phase. All the iron oxyhydroxides were identified in all of the studied sculptures but their relative amounts were different for each sculpture. The consequences of the marine aerosols exposure in the steel surface were also studied, detecting limonite (FeO(OH)·nH₂O) and akaganeite (β‐FeO(OH)). The results confirmed that the evolution of the rust layer present on the analyzed weathering steels is different, depending both on the exposure and the particular type of the steel. Copyright © 2012 John Wiley & Sons, Ltd.     

�й���̬����ģ�鵥������ɢ����ʵ������о�

利用单轴热扩散焊设备对中国固态包层模块结构材料CLF-1钢进行了初步的实验研究。实验结果表明,在焊缝界面结合率达到一定程度时,焊件接头的拉伸强度与塑性性能可以达到母材的水平;但焊件接头的冲击韧性则很敏感,其中最好的实验测试值只达到了母材相应值的48%,这与焊缝界面上残留污染物所导致的接头空隙缺陷有关。     

Evolution of magnetic phase at low aging temperature in a heavily cold-drawn stainless steel fiber

The evolution of the magnetic phase upon aging at 300–520 °C in a heavily cold-drawn AISI 316L austenitic stainless steel fiber was studied using thermomagnetic analysis (TMA) and magnetic force microscopy with a heating stage. An increasing trend of magnetization from 50 °C to around 470 °C in the heating curves of TMA in austenitic stainless steels after a cold-drawing process was observed. No significant M_s temperature signal in the TMA curve at cooling indicated an increase in magnetization upon cooling period without significant phase transformation. A series of in situ magnetic force microscopy observations reveal a growth of the magnetic domain structure after aging at 300 °C for 2.5 h. Results show that the ferromagnetic increase during aging at lower annealing temperature resulted from the growth of martensite.